FlySafe™ Hot Air Balloon Temperature Monitor

FlySafe™ Hot Air Balloon Temperature Monitor

£419.00

The FlySafe™ Temperature Monitor is a simple, effective device keeping you safe in the air and protecting the life of your balloon fabric, especially when glowing.

The FlySafe™ Monitor attaches near the top of your balloon using a velcro strip that you may not even know is there – all major manufacturers pre fit them.

The Monitor connects wirelessly to the Receiver in the basket displaying the current temperature nice and clearly for you.

 

What’s in the box?
1 x FlySafe™ BTM-1S Temperature Sender
1 x FlySafe™ BTM-1R Temperature Receiver
1 x Zipped protective case
8 x AA/LR6 Batteries
1 x Velcro Strap
1 x User Manual (English)

Available on backorder

Flying

Nothing gives you more confidence in the air than knowing the envelope temperature above. FlySafe™ is an affordable, reliable device to keep you safe from accidental overheating. It also includes a simple flight timer to see how long you’re been in the air.

A load chart will give you theory, but rapid climbs, flying through inversions or at altitude will cause your envelope temperature to fluctuate and once you’ve flown with this, you’ll never fly without it again.

 

Tethering

The unique backlight takes all of the worries about overheating during those long all burns away. Simply note the temperature when you’ve inflated and just stay above this figure to avoid the balloon deflating. You’ll be surprised how low this initial temperature usually is and you’ll use a lot less fuel and heat than before to stay upright. During those busy ‘all burns’, you can watch the screen and vent as soon as you start to get too hot.

 

Night Glows

The unique backlight takes all of the worries about overheating during those long all burns away completely. Again, simply note the temperature when you’ve inflated and just stay above this figure to avoid it coming down. You’ll be surprised how cool this usually is and you’ll find you are using a lot less fuel and heat than before to stay upright. During those busy all burns, you can watch the screen and vent as soon as you start to get too hot.

Reviews

There are no reviews yet.

Be the first to review “FlySafe™ Hot Air Balloon Temperature Monitor”

Your email address will not be published. Required fields are marked *